🔄 Step-by-Step Installation Guide
🧭 Step 1: Prep & Position
✅ Look for the “F” (Front) and “B” (Back) markers inside the cover. “F” faces you when wrapped.
Center the cover on the wheel. Line up the 12 o’clock marker perfectly before doing anything else. Ensure the fit is snug.
🎯 Step 2: Use Double-Sided Tape (Optional but Recommended)
Apply the tape inside the cover to help hold it in place. Use short strips around the edges, but avoid stitching zones.
Visual Tip: Show a diagram/picture with tape placement zones (green = safe, red = avoid).
🧵 Step 3: Wrap & Align
Wrap the cover tightly around the wheel. Make sure it’s centered and smooth. This is your last chance to align before stitching!
🪡 Step 4: Thread + Choose Your Stitch Style
Cut thread about the length of your arm. Thread the needle and tie a knot.
Choose Your Stitch:
- 🧷 Baseball Stitch (X) – Classic sporty style
- 🔁 Loop Stitch – Beginner-friendly
- 🔒 Hidden Stitch – Seamless + sleek
Note: Stick with one style the entire way around for best results.
💪 Step 5: Start Stitching
Begin at the bottom left of the wheel and work clockwise. Pull each stitch tight and check spacing every 3–4 stitches.
🎯 Consistency = Clean Finish
✂️ Step 6: Finish Strong
Tie off the thread tightly and tuck it under using the plastic tool. Trim any excess thread.
